[ Home > Parts & Kits > Parts & Supplies > Steering and Suspension Parts > Tie Rod End ]
 Factory Tie Rod End. Castle Nut and grease fitting included. Note about thread direction: Each tie rod consists of one left-hand-thread tie rod end and one right-hand-thread tie rod end. Originally, the left-hand-thread is installed on the outer end, and the right-hand-thread on the inner end. It is possible that the tie rod assembly was installed backwards. This does not interfere with vehicle operation in any way, but you should always check which thread-direction you need. The rear radius rod cannot be installed backwards, and the outer end is always left-hand-thread. |
Copyright© 2003 - 2012 BlueHummer Outfitters All rights reserved. Hummer brand is registered by GM and/or AM General. BlueHummer Outfitters is neither affiliated with nor endorsed by GM and/or AM General. Last Update: May 21, 2012 |